Car Diagnostic Tool Center

How to use OBDSTAR X300 DP PAD OBDII Diagnosis Function?

uobdii | 29 March, 2018 20:44

This is an OBDSTAR X300 DP PAD Programmer user manual, from vci connection to auto obdii diagnosis. The most details for you all, especially for newbies.
obdstar x300 pro3 key master
obdstar-x300-dp-diagnostic-tool
VCI connector connection

  1. Locate vehicle’s DLC socket. The DLC (Data Link Connector or Diagnostic Link Connector) is the standardized 16cavity connector where diagnostic code readers interface with the vehicle’s onboard computer. The DLC is usually located 12 inches from the center of the instrument panel (dash), under or around the driver’s side for most vehicles. If Data Link Connector is not located under dashboard, a label should be there telling location. For some Asian and European vehicles, the DLC is located behind the ashtray and the ashtray must be removed to access the connector. If the DLC cannot be found, refer to the vehicle’s service manual for the location.
  2. Plug the VCI diagnostic connector into the vehicle’s DLC socket (It is suggested to use the OBD 2 extension cable to connect VCI connector and DLC socket.). For non16PIN DLC socket, please select the corresponding non16 pin connector adapter, then plug the non16pin end

of the adapter into the DLC socket, and then connect the standard 16pin end VCI connector.


Bluetooth setting
1Enter Key Master to set System setting, and choose VCI information.
2Operate according to following prompt:
A“Please match: VCI_888888888888(Bluetooth name)”
b“Connected: VCI_888888888888(Bluetooth name)”
C“Not connected: VCI_888888888888(Bluetooth Name)” Please connect VIC connector to vehicle, X300 DP will connect automatically.

WIFI setup
Set WiFi on

  1. Enter main menu screen, choose “Settings” > WLAN
  2. When the WLAN sign appears blue, , it indicates WiFi has been activated already.

Note: To prolong the battery life, please switch WiFi off when it keeps
unattended.
Connect to WLAN
Start WLAN, if X300 DP within range of WLAN, X300 DP can automatically detect and connect to current WLAN, select desired network and input password, then you can surf the internet by WLAN.

Diagnosis flowchat
For new users, please follow the operation below to get familiar with and start using X300 DP.
VCI diagnostic connector VCI –> Bluetooth connection (USB connection)–>user registration–>user login–>download or upgrade software–>select function or vehicle type–>proceed diagnosis

User registration 
Click on the “DP” button to enter user registration diagnostic software. Select “the user information” in the “setting” menu, then enter user registration
obdstar-x300-dp-obdii-diagnosis-(1)
Fill in the information in each field (Items with * must be filled). After inputting, tap “OK”
If you have registered to be a member, click on “the user information” to enter user login page
obdstar-x300-dp-obdii-diagnosis-(2)
X300 DP diagnosis software download
Tap “One Key Upgrade” to enter one key upgrade page, as following picture shown:
obdstar-x300-dp-obdii-diagnosis-(3)
Tap “One Key Upgrade” to start downloading, enter main interface after finishing downloading. (Notes: Ensure internet connection is normal when updating. Besides, because of many software, it may take several minutes, please wait patiently) If need to cancel a software, just tap corresponding Check Box as below:
obdstar-x300-dp-obdii-diagnosis-(4)
Start Diagnosing
Tap on the main menu screen, and then choose “DP” to enter the function selection and vehicle selection page.
obdstar-x300-dp-obdii-diagnosis-(5) obdstar-x300-dp-obdii-diagnosis-(6) obdstar-x300-dp-obdii-diagnosis-(7)

Hereinafter, take OBDII for example, to introduce how to start diagnosing.
Tap ” OBDII ”, and tap “OBDII” icon.
obdstar-x300-dp-obdii-diagnosis-(7)
To select software version
obdstar-x300-dp-obdii-diagnosis-(9)
To enter diagnostic function menu,
obdstar-x300-dp-obdii-diagnosis-(9)
To select AUTO SCAN
obdstar-x300-dp-obdii-diagnosis-(11)
Read vehicle information
obdstar-x300-dp-obdii-diagnosis-(12)
Read trouble code
obdstar-x300-dp-obdii-diagnosis-(13)
Clear trouble code
obdstar-x300-dp-obdii-diagnosis-(13)
Read data stream
obdstar-x300-dp-obdii-diagnosis-(15) obdstar-x300-dp-obdii-diagnosis-(16)


Note: there are two versions of x300 dp obdstar in the market:
OBDSTAR X300 DP Standard version = Immobilizer+ Odometer Adjustment+ EEPROM/PIC Adapter + OBDII diagnosis
OBDSTAR X300 DP full version = Immobilizer + odometer adjustment + EEPROM/PIC adapter + OBDII diagnosis + ABS + TPS + SRS reset + TPMS(low tire)reset + Steering angle reset+ CVT learning/Value reset + EPB + Oil/service reset + Battery matching
( it works well in Diagnosis for Japanese and Korean cars.)
http://www.obdstartool.com

SEC-E9 to cut Toyota TOY43 keys in 2 ways?

uobdii | 25 March, 2018 21:20

Post on how to cut Toyota TOY43 keys with SEC-E9 automatic key cutting machine in 3 steps: Enter the key data, get the key number and cut the key.
sec-e9-cut-toyota-toy43-keys-01
Guide:

  1. Enter the key data of Toyota TOY43 in two ways.


Way 1: Select car manufacture, brand and year.
Tap “Automobile” button and “Toyota – Camry – 2006 -[10] to enter the key data.
sec-e9-cut-toyota-toy43-keys-02

Way 2: Input the key blank number
Tap “Search” button, input “TOY43” and select “Silca” – “TOY43(903) [10] ” to enter key data.
sec-e9-cut-toyota-toy43-keys-03
sec-e9-cut-toyota-toy43-keys-04
sec-e9-cut-toyota-toy43-keys-05
Tap “Info” button to see the key is aligned by tip. Usually no need to use stopper when fix the key position.
sec-e9-cut-toyota-toy43-keys-06
sec-e9-cut-toyota-toy43-keys-07

Step 2. Get the key numbers of Toyota TOY43 keys using SEC-E9 in 3 ways.
Way 1:Decoding the original key.
Tap “Decode ” button to enter the decoding page.
Select the dark blue icon as sense key location and “Round off”.
sec-e9-cut-toyota-toy43-keys-08
sec-e9-cut-toyota-toy43-keys-09
Check if the original key can open the cylinder.
sec-e9-cut-toyota-toy43-keys-10
Fix the original key on the top level of the clamp. please pay attention to the key position.
sec-e9-cut-toyota-toy43-keys-11
sec-e9-cut-toyota-toy43-keys-12
sec-e9-cut-toyota-toy43-keys-12

Tap the “Decode” button to start decoding the original key and get the key numbers.
sec-e9-cut-toyota-toy43-keys-14
alt
alt
alt
alt

Way 2: search key code.
This is key code for Toyota Camry key.
alt

Tap “Code” button and input “55062” to get the key number.
sec-e9-cut-toyota-toy43-keys-20
sec-e9-cut-toyota-toy43-keys-21

Way 3: Input key numbers directly.
Tap “Input” button and input the key numbers you get from other ways, such as cylinder, Lishi tool, or instacode, etc.
sec-e9-cut-toyota-toy43-keys-22
Step 3. Cut a new Toyota Camry key.
Tap the “Cut” button to enter the cutting page.
sec-e9-cut-toyota-toy43-keys-23

Select “NKI-silver” as speed and the most right blue icon as sense key location.
sec-e9-cut-toyota-toy43-keys-24
sec-e9-cut-toyota-toy43-keys-25
Take out the original key and fix a new key blank on the top level of the clamp. Please pay attention to the key position.
sec-e9-cut-toyota-toy43-keys-26
Tap “cut” button to start cutting a new key. Please remember to close the safe gate.
sec-e9-cut-toyota-toy43-keys-27
sec-e9-cut-toyota-toy43-keys-28
SEC-E9 Cutting is done. Open the safe gate. Clean the clamp & the new keys.
Take out the new key.

The new key is working well.
sec-e9-cut-toyota-toy43-keys-29

http://www.uobdii.com/wholesale/sec-e9-cnc-automated-key-cutting-machine.html 

http://www.keycuttingmachine.org

CARPROG Full ECU Chip Tunning Feedback

uobdii | 20 March, 2018 21:28

This post collects all of available customer feedback on CARPROG Full ECU Chip Tunning. Hope it helps!

alt



  1. CARPROG works with both solution, odb and welding to read the EPROM.

some airbag crash can be repaired by obd but in general we have to and passed by the box desoldering of EPROM. the advantage, it has a database of clear crash for some model, an original radio code generator; this is a good program to start.
CARPROG full v7.28 with everything and explained in the software, and it comes with several
connectivity number. As selecting a function that we want to use it tells us what connectors used.
It is even illustrated with photos very nice.Car Key programemr
2.
For me, it’s not bad to begin with, the basic equipment (hot air station, flux pen, soldering iron with a fine tip) ismandatory to exploit
3.
Beginners opt for CARPROG.It offers a lot of opportunity, it does not cover all but a good party. Simple handling,intuitive app. it is polivalent dash, immo, radio ..
4.
I used to virginiser of BSI, I also managed to modify a 2002 vehicle en dash (just to test, Idelivered as it was before)
I also managed to lire OF 5p08 (95p08) and write off properties not bad for beginners, less effective than XPROG or UPA but easier to use.
good flash
5.
Question: You have a merchant recommend? a Chinese version is it the case?
Reply:http://www.uobdii.com/wholesale/carprog-full.html
They are well and have a very proper customer relationship

Question: You mean the clone or the original? Because the budget is not the same … And the clone functionality level, we can estimate how many percent compared to the original (if quantifiable)? Gadget or good tool to start?

Reply: It is 40% of the original on the radio codes ok but the dashboard there is not any lack of image the rest is a very fragile CARPROG use it after several silliness more communication with the interface, it must be used with a PC without internet with a stable and xp ca va …
Super good tools began frankly I’m very happy easy to use but it’s still the lolll brol as a tool that makes
http://blog.uobdii.com

several operations:
-airbag
-code radio
-Immo
-counter
-ecu opel
-some ePROM
-some mcu
(A tool that helps you one day is priceless …)

This article from:http://carprog-carprog.blogspot.com

SBB Key Programmer Register Nissan Note 2007 Chip Key

uobdii | 19 March, 2018 22:20

This is a Nissan Note 2007  (automatic, right wheel, Intelligent Key). There is a working key, customer need to add chip key startup..So this post show the guide on how to register chip key for Nissan Note 2007 by SBB Key Programmer.

alt

alt
(Note: The tutorial is translated from Russian, for educational purpose only)
Diagnostic device ABRITES Vehicle Diagnostic Interface , when selecting (Nissan Note 2006+) requires a 12-digit PIN code, which is presumably considered for label located behind the glove compartment (glove box).
alt
But the car has a sticker, so the chip should be registered with the device SBB Key Programmer.
alt

How to calculate PIN code for registration key / chip in the car?

PIN will be assumed by the label BCM, with the help of the program AD600 Code Wizard Pro (Demo the Version) , which can be downloaded at this  link. Or by hand-held Nissan Pin code reader NSPC001.
alt
To perform this procedure, you’ll need:
  • Net HITAG 2 transponder – PCF7936.
  • Wires (jumpers), for supplying power to the ignition contacts.

How to register the vehicle key / chip on Nissan Note using SBB Key Programmer?

1. Insert the device connector SBB v46.02 in OBDII vehicle.
2. The instrument select NISSAN JAPANthe MICRA MARCH 00-Gasoline
alt

alt

alt
3. Then Insert a key and turn on the console – Insert the key into the lock, and turn the ignition switch on.
alt
4. The instrument choose NATS 5the PROG. NEW KEYS.
alt

 

alt

5. Without the PIN CODE you CAN not program new keys – Without a PIN, you can not program the new keys.

alt

6. Enter the 4-digit PIN number, counted on the label BCM.
alt


7. Insert keys to be programmed in sequence and turn them on and off for 5 sec respectively. In the end start the engine for some sec. Press any key … Press – Insert the key to be programmed in sequence, one after the other, on and off the ignition for 5 seconds. After the end of the programming start the engine.

alt

8. Once the button is pressed all quickly, without errors:

  • LED standard signaling, in the right corner at the windshield starts to blink.
  • Turning off the ignition, take out a sting from the ignition.
  • We put a thorn in the ignition, turn the ignition.
  • Turning off the ignition, take out a sting from the ignition.
  • Place the transponder antenna on the ignition.
  • Provide the + 12V on wire and KEY IN KEY PUSH (red-blue and red and white, respectively).
  • Turning on the ignition by supply of + 12V to the corresponding contacts ignition.
  • Turn off the ignition.
  • We start the engine.

http://www.carkeydeals.com
Article from SBB Key Programmer Blog Site: http://sbb-keyprogrammer.blogspot.com/2017/12/sbb-key-programmer-register-nissan-note.html

OBDSTAR X300DP Adjust Mileage for Cadillac ATSL 2016

uobdii | 08 March, 2018 02:34

OBDSTAR X300 DP tablet Key Programmer not only play with programming keys but also some special functions like program ECU , read Pin code, adjust Mileage etc. Really a higher level diagnostic tool for workshop or dealer.

Here is step by step procedure of changing mileage for Cadillac ATSL 2016.

Device:

OBDSTAR X300DP PAD Tablet Key Programmer


Vehicle:
-Cadillac ATSL 2016

alt

Step1: Prepare
Connect X300DP with vechile and open X300DP
Press on START button

alt
Step2: Choose vehicle information
Choose “Mileage adjust” option and click on GM

alt

Choose GM V30.45 to go on

alt

Then choose Cadillac
alt
Choose ATS2013-

alt
Mileage adjustment (correction)

alt
It is communicating...

Step3: Adjust mileage

The current mileage information

alt

Input the new mileage and press ENTER to continue

alt
Value: 3061

alt


It is communicating...
The mileage value at presant

alt




alt

Done! Successfully change mileage for Cadillac ATSL 2016

More info about OBDSTAR X300 DP,pls visit:
http://www.obdstartool.com/wholesale/obdstar-dp-x300-pad-system.html

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6