Car Diagnostic Tool Center

XTOOL X100 Pad2 Lire Peugeot 206 BSI Code PIN Rapport d'essai

uobdii | 29 October, 2018 22:47

Ce poste vous partager avec le processus sur la façon dont XTOOL X100 Pro Pad2 lire le code PIN BSI Peugeot 206.
Utiliser les outils:
XTOOL X100 Pad2
XTOOL adaptateur EEPROM

Connect X100 Pad2, adaptateur Eeprom et bsi 95160 puce CPU

alt

 

alt



Sélectionnez Lire le code Pin

alt


Sélectionnez l'adaptateur EEPROM

alt



Assurez-vous que l'adaptateur Eeprom est connecté et sous tension, l'indicateur d'état se allume

alt

  
sélectionner la marque de voiture: Peugeot-> 206-> BSI 95160

alt

 

alt

 

alt


sélectionnez V1 ou V2

Si la communication a échoué erreur, sélectionnez une autre option ou réessayer

alt



Enregistrer des données 

alt



Lire avec succès Peugeot 206 BSI code PIN par XTOOL X100 Pad2 !

alt


Article de XTOOL
JLR Key Programmer

OtoSys IM100 Program Key for Volvo 2010-2016

uobdii | 24 October, 2018 22:55

AURO Otosys IM100 is verified to work with VOLVO immobilizer from the year 2010 to 2016.It’s second to Lonsdor K518ise universal key programming tool that support VOLVO.

http://www.obd360.com
Step 1: learn keys
AURO Otosys im100 tested with Volvo immo…
otosys-im100-volvo-key-programming-1 otosys-im100-volvo-key-programming-2 otosys-im100-volvo-key-programming-3 otosys-im100-volvo-key-programming-4 otosys-im100-volvo-key-programming-5 otosys-im100-volvo-key-programming-6
Otosys IM100 Volvo car list:
Volvo S60, S80, V40, V60, V70, XC60, XC70
semi-smart keys 2010-2016
Keyless CAN system

Auro IM100 begins to program new semi-smartkeys to Volvo when all keys are lost
otosys-im100-volvo-key-programming-7 otosys-im100-volvo-key-programming-8

If you want to continue to performing this function, there must be one key!
The original key, if cleared successfully, needs to be learned again
Please verify the type of the key first
Ignition off
Learned keys: 2
otosys-im100-volvo-key-programming-9
Step 2: decrypt the immo & clear all keys
The immobilizer unit is to be decrypted, which may last a few hours.
Please make sure that the ignition is turned off
You can exit this process at any time and continue from the interruption point in the next operation
otosys-im100-volvo-key-programming-10
Decrypting the immobilizer unit…
The procedure will take 0-8 hours due to the difference between vehicles.
You’d better manually close the center-control LCD, lamp, etc. Toreduce the power consumption
It doesn’t matter whether the door is opened or closed
You can exit this process at any time and continue from the interruption point in the next operation
otosys-im100-volvo-key-programming-11
Decrytion success
otosys-im100-volvo-key-programming-12
Otosys im100 is reading security data
Don’t disconnect the OBD connection
otosys-im100-volvo-key-programming-13
Copy CEM security data successfully
otosys-im100-volvo-key-programming-14
All key cleared! Learned keys: 0
otosys-im100-volvo-key-programming-15 otosys-im100-volvo-key-programming-16

Step 3: learn keys
Key learning success
otosys-im100-volvo-key-programming-17
Ignition off  OBDSTAR
Remove the key from the key slot
otosys-im100-volvo-key-programming-18
Learned keys: 4
otosys-im100-volvo-key-programming-19

UOBDII All rights reserved How to Use OtoSys IM100 to Program Key for Volvo 2010-2016

OBDSTAR H110 Customers Feedback: Work perfect

uobdii | 10 October, 2018 23:05

OBDSTAR H110 VAG key program & KM change Feedback, most users test it works perfectly.

  1. Dash Touran 10/2014 ok
  1. Skoda Fabia 12/2016 Mileage change works.

obdstar-h110-skoda-fabia-mileage-change-01 obdstar-h110-skoda-fabia-mileage-change-02

  1. OBDSTAR H110 good tool i have made a key for vw polo and vento working fine and for km also good.

obdstar-h110-vw-polo-2013-nec-24c32-key-programming-01 obdstar-h110-vw-polo-2013-nec-24c32-key-programming-02 obdstar-h110-vw-polo-2013-nec-24c32-key-programming-03 obdstar-h110-vw-polo-2013-nec-24c32-key-programming-04 obdstar-h110-vw-polo-2013-nec-24c32-key-programming-05

  1. VW Sharan 2015 km change ok

alt

  1. MK7 Golf Yes

Cannot use a used key. Need new transponder.
obdstar-h110- mk7-golf-01 obdstar-h110- mk7-golf-02 obdstar-h110- mk7-golf-03 obdstar-h110- mk7-golf-04 obdstar-h110- mk7-golf-05

  1. Audi A4 2014 Key program ok

alt

  1. Skoda Fabia 12/2016 Mileage change works.

alt alt

  1. VW Sharan 2015 km change ok

alt

  1. "5 – 2014. Ok
    "6 – 2017. Ok
    Fabia MQB 1016. Ok
    Golf 2015 1.4. MQB Ok
  1. support lost keys for VW group as long as the IMMO is not higher than 4th generation.
  1. Passat B6 2008 cdc km correction okay.
  1. Skoda Superb 2010 immo area read okay.
    T5 2012 immo area read okay. 
  1. Sharan 2014 color display
    eeprom read okay
    immo area read okay
    km correction okay.


Best place to buy obdstar H110 from:
You can buy from this shop:
http://www.obdstartool.com/wholesale/obdstar-h110-vag-i-c-for-mqb.html
Who are OBDSTAR authorized dealer, sales original obdstar devices at best price and professional tech support.


From OBDSTAR, post OBDSTAR H110 VAG key program & KM change Feedback: Work perfect

XTOOL X100 Pad2 BMW Key Programming Feedback

uobdii | 08 October, 2018 01:06

Recently, one customer got his new XTOOL X100 Pad2 but he is sad to find that this pad can’t work! He uses this pad2 to do BMW Key programming but fail. What happen? Let us find out why and solve this problem.

Here attach an image to express his situation:

xtool X100 PAD2-Fail-to-do-BMW-Key-1

Customer: This weekend I tried a Q7 2006 to diagnose the pneumatic shock absorbers the aircraft supports only 5 marked so Jaguar, land rover, Benz and another brand. And my BMW 3 series E91 for DPF system (the fap) because I have the light FAP lit nothing it does not work.

Today I tried to program a key on a Golf 2000 gasoline and I can not, I try to make a BMW e46 it does not work either. I would like to have the procedure to follow !!! Please, thank you in advance

 

Engineer suggest customer change the menu from “F chassis and E chassis” to “CAS 1-3”

 

While customer still can’t do BMW key program after using the “CAS 1-3”. And it appears a “Fail to communicate” and a CAS 1-3 using note:

xtool X100 PAD2-Fail-to-do-BMW-Key-2 xtool X100 PAD2-Fail-to-do-BMW-Key-3

Here are some tips to use XTOOL X100 Pad2:

  • Choose the right menu or change the menu when you meet problem programming.
  • Update the device to the latest version software.
  • If the X100 Pad2 still can’t work after update, you could tap the “Help” on the device to test the device so that the engineer could give you more detail solution.

 

If you have any problem when using XTOOL, please contact us.

 

http://blog.uobdii.com

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6