Car Diagnostic Tool Center

SBB Key Programmer Register Nissan Note 2007 Chip Key

uobdii | 19 March, 2018 22:20

This is a Nissan Note 2007  (automatic, right wheel, Intelligent Key). There is a working key, customer need to add chip key startup..So this post show the guide on how to register chip key for Nissan Note 2007 by SBB Key Programmer.

alt

alt
(Note: The tutorial is translated from Russian, for educational purpose only)
Diagnostic device ABRITES Vehicle Diagnostic Interface , when selecting (Nissan Note 2006+) requires a 12-digit PIN code, which is presumably considered for label located behind the glove compartment (glove box).
alt
But the car has a sticker, so the chip should be registered with the device SBB Key Programmer.
alt

How to calculate PIN code for registration key / chip in the car?

PIN will be assumed by the label BCM, with the help of the program AD600 Code Wizard Pro (Demo the Version) , which can be downloaded at this  link. Or by hand-held Nissan Pin code reader NSPC001.
alt
To perform this procedure, you’ll need:
  • Net HITAG 2 transponder – PCF7936.
  • Wires (jumpers), for supplying power to the ignition contacts.

How to register the vehicle key / chip on Nissan Note using SBB Key Programmer?

1. Insert the device connector SBB v46.02 in OBDII vehicle.
2. The instrument select NISSAN JAPANthe MICRA MARCH 00-Gasoline
alt

alt

alt
3. Then Insert a key and turn on the console – Insert the key into the lock, and turn the ignition switch on.
alt
4. The instrument choose NATS 5the PROG. NEW KEYS.
alt

 

alt

5. Without the PIN CODE you CAN not program new keys – Without a PIN, you can not program the new keys.

alt

6. Enter the 4-digit PIN number, counted on the label BCM.
alt


7. Insert keys to be programmed in sequence and turn them on and off for 5 sec respectively. In the end start the engine for some sec. Press any key … Press – Insert the key to be programmed in sequence, one after the other, on and off the ignition for 5 seconds. After the end of the programming start the engine.

alt

8. Once the button is pressed all quickly, without errors:

  • LED standard signaling, in the right corner at the windshield starts to blink.
  • Turning off the ignition, take out a sting from the ignition.
  • We put a thorn in the ignition, turn the ignition.
  • Turning off the ignition, take out a sting from the ignition.
  • Place the transponder antenna on the ignition.
  • Provide the + 12V on wire and KEY IN KEY PUSH (red-blue and red and white, respectively).
  • Turning on the ignition by supply of + 12V to the corresponding contacts ignition.
  • Turn off the ignition.
  • We start the engine.

http://www.carkeydeals.com
Article from SBB Key Programmer Blog Site: http://sbb-keyprogrammer.blogspot.com/2017/12/sbb-key-programmer-register-nissan-note.html

Comments

cialis professional sale

RichardKip | 19/03/2018, 22:44

buy cialis online from canada
cialis pills
cialis 20mg pills sale
[url=http://cialisifbnam.com/#]buy cialis[/url]
buy cialis uk online
cialis generic
buy cialis no rx
[url=http://tgjcialisopfg.com/#]generic cialis 2018[/url]
buy generic viagra cialis

Add comment

 This is the ReCaptcha Plugin for Lifetype

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6